ArticleMaterials (Basel, Switzerland)2023
The Influence of Alumina Airborne-Particle Abrasion with Various Sizes of Alumina Particles on the Phase Transformation and Fracture Resistance of Zirconia-Based Dental Ceramics.
Article in Materials (Basel, Switzerland), 2023. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 13 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
13 citing papers in PubMed, 7 citations in OpenAlex.
- Effect of airborne particle abrasion on the surface roughness of high-translucent 5Y-PSZ following simulated long-term oral aging: a non-contact optical profilometric in-vitro study.BMC research notes · 2026Article
- Impact of Various Sleeve Materials on Temperature Variations During Guided Endodontic Access Cavity Preparation Utilizing Finite-Element Analysis.Clinical and experimental dental research · 2026Article
- Influence of chemical conditioning and micromechanical roughening on bond strength to zirconia ceramic.BMC oral health · 2026Article
- Effect of Airborne Particle Abrasion and Nitric-Hydrofluoric Acid Etching on the Mechanical and Structural Properties of 3Y- and 5Y-TZP Zirconia.International journal of dentistry · 2026Article
- Selective Infiltration Etching as a surface modification for high-translucency zirconia: Comparative analysis of roughness, composition, and bond strength.F1000Research · 2026Article
- Biaxial strength under fatigue of 4YSZ: Surface treatment and resin cement viscosity effects.PloS one · 2026Article
- Evaluation of Flexural Resistance in Co-Cr Ceramic Systems: Conventional Casting Versus 3D Printing-A Pilot Study.Dentistry journal · 2025Article
- Effectiveness of Silica Coatings in Enhancing Resin Cement Adhesion to Zirconia: A Systematic Review.Dentistry journal · 2025Review
- Enhancing dental porcelain repair strength: the impact of chairside plasma surface treatment-an in vitro study.BMC oral health · 2025Article
- Bond strength of aged provisional 3D-printed methacrylate resin with different surface treatments and repair materials.BMC oral health · 2025Article
- Development of Novel Ceramic Microstructures from Sintered Biomass and Fly Ash Mixtures: Promoting Sustainability and Health.Materials (Basel, Switzerland) · 2025Article
- Effect of sandblasting and MDP based primer application on the surface topography and shear bond strength of zirconia: AnF1000Research · 2025Article
- Effect of air-particle abrasion and methacryloyloxydecyl phosphate primer on fracture load of thin zirconia crowns: anFrontiers in dental medicine · 2024Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
4 authors at 1 institution in 1 country.
Funding
Abstract
The surface of zirconia-based dental ceramic restorations require preparation prior to adhesive cementation. The purpose of this study was to assess the influence of airborne-particle abrasion with different sizes of alumina particles (50 μm, 110 μm, or 250 μm) on the mechanical strength of zirconia-based ceramics' frameworks and on the extent of phase transformations. A fracture resistance test was performed. The central surface of the frameworks was subjected to a load [N]. The identification and quantitative determination of the crystalline phase present in the zirconia specimens was assessed using X-ray diffraction. The Kruskal-Wallis one-way analysis of variance was used to establish significance (α = 0.05). The fracture resistance of zirconia-based frameworks significantly increases with an increase in the size of alumina particles used for air abrasion: 715.5 N for 250 μm alumina particles, 661.1 N for 110 μm, 608.7 N for 50 μm and the lowest for the untreated specimens (364.2 N). The X-ray diffraction analysis showed an increase in the monoclinic phase content after air abrasion: 50 μm alumina particles-26%, 110 μm-40%, 250 μm-56%, and no treatment-none. Air abrasion of the zirconia-based dental ceramics' surface with alumina particles increases the fracture resistance of zirconia copings and the monoclinic phase volume. This increase is strongly related to the alumina particle size.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.