Grafting Polymerization of Long-Chain Hydrophobic Acrylic Monomer onto Lignin and Its Application in Poly(Lactic Acid)-Based Wholly Green UV Barrier Composite Films.

The development of low-cost and high-performance bio-based composites derived from forestry waste lignin and polylactic acid has emerged as a topic of central attention. However, the weak compatibility between lignin and polylactic acid often resulted in high brittleness of the composites. Graft copolymerization is not only the most effective way to modify lignin but also can significantly improve the compatibility of lignin and polylactic acid. In this study, bio-based monomer lauryl methacrylate was grafted onto lignin by feasible radical polymerization to prepare lignin graft copolymers with excellent thermal stability and hydrophobicity, which are expected to improve the compatibility with polylactic acid. Wholly bio-based composites were prepared by compounding this graft copolymer with polylactic acid. The results showed that the crystallization ability of the composite was improved, and the highest crystallinity was increased from 6.42% to 17.46%. With addition of LG-g-PLMA lower than 9%, the thermal stability of the composites was slightly improved. At 5% copolymer addition, the elongation at break and tensile toughness of the composites increased by 42% and 36%, respectively. Observation of the frozen fracture surface of the composite by SEM found that wire drawing and ductile deformation appeared when a small amount of LG-g-PLMA was added. The thus prepared composites also showed excellent UV barrier properties. This approach provides a new idea for the high-value application of lignin.