A New Form of Train Detection as a Solution to Improve Level Crossing Closing Time.

The critical points on the rail and road network are their intersections, i.e., level crossings. During a train crossing, car traffic is stopped. This reduces the fluidity of traffic on the road and, consequently, can cause congestion. The problem increases with the number of cars and trains. Frequently, due to national regulations, level crossing closure times are long. It is mainly dictated by safety issues. Building two-level intersections is not always a good solution, mainly because of the high cost of implementation. In the article, the authors proposed the use of sensors to reduce level crossing closure times and improve the Level of Service on the road network. The analyzed railroad lines are local agglomeration lines, mainly due to safety (low speed of commuter trains) and high impact on the road network. The sensors proposed in the article are based on radar/LIDAR. Formulas similar to HCM methods are proposed, which can be implemented in a railroad crossing controller. Simulations using the PTV Vissim program are carried out and the results are worked out based on the obtained data. The considered method can reduce the level crossing closure time by 68.6%, thereby increasing the Level of Service on roads near railroads.