TiO2 NPs-immobilized silica granules: New insight for nano catalyst fixation for hydrogen generation and sustained wastewater treatment.

In heterogeneous catalytic processes, immobilization of the functional material over a proper support is a vital solution for reusing and/or avoiding a secondary pollution problem. The study introduces a novel approach for immobilizing R25 NPs on the surface of silica granules using hydrothermal treatment followed by calcination process. Due to the privileged characteristics of the subcritical water, during the hydrothermal treatment process, the utilized R25 NPs were partially dissolved and precipitated on the surface of the silica granules. Calcination at high temperature (700°C) resulted in improving the attachment forces. The structure of the newly proposed composite was approved by 2D and 3D optical microscope images, XRD and EDX analyses. The functionalized silica granules were used in the form of a packed bed for continuous removal of methylene blue dye. The results indicated that the TiO2:sand ratio has a considerable effect on the shape of the dye removal breakthrough curve as the exhaustion point, corresponding to ~ 95% removal, was 12.3, 17.4 and 21.3 min for 1:20, 1:10 and 1:5 metal oxides ratio, respectively. Furthermore, the modified silica granules could be exploited as a photocatalyst for hydrogen generation from sewage wastewaters under direct sunlight with a good rate; 75×10-3 mmol/s. Interestingly, after the ease separation of the used granules, the performance was not affected. Based on the obtained results, the 170°C is the optimum hydrothermal treatment temperature. Overall, the study opens a new avenue for immobilization of functional semiconductors on the surface of sand granules.