Accuracy and eligibility of Bonwill⁃Hawley arch form established by CBCT image for dental crowding measurement: a comparative study with the conventional brass wire and caliper methods.

objectivesThe purpose of this study was to develop a novel Bonwill⁃Hawley method (Bonwill⁃Hawley arch form based on CBCT image) for the assessment of dental crowding, and to investigate and compare the accuracy and eligibility with the conventional brass wire and caliper methods under different crowding conditions. MATERIAL AND

methodsSixty patients with the pair of plaster casts and CBCT data were collected. All the casts were marked and transformed into digital models using iTero scanner, and imported into OrthoCAD software to measure the required space. Using the conventional brass wire (M1) and caliper methods (M2), the available space and dental crowding were measured and calculated basing on digital models, respectively. Correspondingly, the axial planes in the level of dental arches were oriented and captured from the CBCT images to draw the Bonwill⁃Hawley arch forms (M3), which were used to measure and calculate the available space and dental crowding. For each method, intra and inter-examiner reliabilities were evaluated with intra-class correlation coefficients (ICCs). Wilcoxon test and Kruskal-Wallis test were performed for statistically analyzing the discrepancy among different groups.

resultsBoth intra- and inter-examiner reliability were generally excellent for all parameters obtained by the three methods, except for the dental crowding measured using M1(ICC: 0.473/0.261). The dental crowding measured using M2 were significantly increased in mild, moderate and severe-crowding groups compared with M1. However, no significant difference was detected between M1 and M3 in severe-crowding group (maxilla, p = 0.108 > 0.05; mandible, p = 0.074 > 0.05). With the deterioration of crowding condition, the discrepancy of dental crowding between M1 and M2, or M1 and M3 were significantly decreased (maxilla, M2-M1, mild VS serve, p = 0.003 < 0.05; maxilla, M3-M1, mild VS serve, p = 0.003 < 0.05; mandible, M2-M1, mild VS serve, p = 0.000 < 0.001; mandible, M3-M1, mild VS serve, p = 0.043 < 0.05).

conclusionDental crowding measured using the novel Bonwill⁃Hawley method was relatively greater than the caliper method, but not exceeding the brass wire method, which wound gradually come close to the brass wire method with the deterioration of crowding condition. CLINICAL RELEVANCE: The Bonwill⁃Hawley method basing on CBCT image proved to be a reliable and acceptable choice for orthodontists to analyze the dental crowding.