Microstructure and Mechanical Properties of Magnesium Matrix Composites Reinforced by In Situ Reduced Graphene Oxide.

Due to their excellent mechanical properties and large specific surface area, graphene and its derivatives are widely used in metal matrix composites as reinforcements. In this study, the thermal reduction behavior of large-size graphene oxide are investigated systematically, and reduced graphene oxide (RGO) with few residual oxygen groups and good structural integrity is obtained. ZK61 matrix composites with varying content of in situ RGO are fabricated using the semi-powder metallurgy method. The results reveal that the addition of RGO can cause the refinement of the grains and the second phase, which is attributed to the uniform distribution of the RGO throughout the matrix. The formation of nano-MgO particles is beneficial in increasing the interfacial bonding strength between the RGO and the matrix, resulting in simultaneous increments in yield strength and elongation in the RGO/ZK61 composites. The composite containing 0.6 wt.% RGO shows a superior mechanical property, including microhardness of 79.9 HV, yield strength of 203 MPa and excellent elongation of 17.5%, with increases of 20.9%, 8.6% and 7.4%, respectively, when compared with the ZK61 alloy. Quantitative analysis indicates that the main strengthening mechanisms of RGO-reinforced magnesium matrix composites are load transfer strengthening and grain refinement strengthening.