High-pressure microwave-assisted pretreatment of softwood, hardwood and non-wood biomass using different solvents in the production of cellulosic ethanol.

backgroundPretreatment is an indispensable stage of the preparation of lignocellulosic biomass with key significance for the effectiveness of hydrolysis and the efficiency of the production of cellulosic ethanol. A significant increase in the susceptibility of the raw material to further degradation can be attained as a result of effective delignification in high-pressure conditions. With this in mind, a method of high-pressure pretreatment using microwave radiation and various solvents (water, 40% w/v NaCS, 1% v/v H

resultsThe highest efficiency of the hydrolysis of biomass, amounting to 71.14 ± 0.97% (glucose concentration 109.26 ± 3.49 g/L) was achieved for wheat straw subjected to microwave-assisted pretreatment using 40% w/v NaCS. Fermentation of this medium produced ethanol concentration at the level of 53.84 ± 1.25 g/L. A slightly lower effectiveness of enzymatic hydrolysis (62.21 ± 0.62%) was achieved after high-pressure microwave-assisted pretreatment of beech chips using 1% w/v NaOH. The hydrolysate contained glucose in the concentration of 91.78 ± 1.91 g/L, and the acquired concentration of ethanol after fermentation amounted to 49.07 ± 2.06 g/L. In the case of pine chips, the most effective delignification was achieved using 60% v/v EtOH with the addition of 1% v/v H

conclusionThe achieved results indicate a high effectiveness of the enzymatic hydrolysis of the biomass subjected to high-pressure microwave-assisted pretreatment. The final effect depends on the combined use of correctly selected solvents for the different sources of lignocellulosic biomass. On the basis of the achieved results, we can say that the presented method indicates a very high potential in the area of its use for the production of cellulosic ethanol involving high-gravity technology.