Primary Investigation of Barite-Weighted Water-Based Drilling Fluid Properties.

Drilling fluid is a critical component in drilling operation due to its various functions. It consists of many elements, and one of the main components is the weighting material which controls the mud density. The weighting material type and concentration have a significant impact on the drilling fluid properties. A common weighting material used in the oil and gas industry is barite. In this work, the impact of barite concentration on water-based drilling fluid was evaluated. The investigated drilling fluid properties are density, pH value, filtration behavior, and rheological parameters. An intense investigation was carried out to evaluate the impact of barite concentration on the filtration and filter cake sealing properties. The density and pH values were measured at room temperature, filtration test was performed at room temperature, and differential pressure was equal to 100 psi. The rheological parameters were determined after hot rolling for 16 h at a temperature of 250 °F. The results showed that both the density and pH value increased linearly with barite dosage. The filtration volume, filter cake thickness, and permeability increased with the incremental increase in barite dosage, and the exponential relationship was the best in describing the relation with barite concentration. However, the filter cake porosity had an inverse proportional relation with barite dosage. In the case of rheological properties, all the investigated properties including the plastic viscosity, yield point, ratio of yield point to plastic viscosity, and gel strength at two different times (i.e., 10 s and 10 min) increased in general as the barite concentration increased.