Evidence map›Paper›PMID 36671914›Full record

ArticleBiosensors2023

Surface Acoustic Wave (SAW) Sensors for Hip Implant: A Numerical and Computational Feasibility Investigation Using Finite Element Methods.

Muhammad Hafizh, Md Mohiuddin Soliman, Yazan Qiblawey, Muhammad E H Chowdhury, Mohammad Tariqul Islam, Farayi Musharavati, Sakib Mahmud, Amith Khandakar, Mohammad Nabil, Erfan Zal Nezhad

Open access · goldAbstract read
PubMed Full text at PMC Publisher
In one paragraph

Article in Biosensors, 2023. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.

0numbers the graph read from it
0cells of the map it votes in
0citing papers in PubMed
0.3field-weighted citation impact, top 49% of its field
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

0 citing papers in PubMed, 3 citations in OpenAlex.

No citing paper in PubMed yet.

4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

10 authors at 3 institutions in 3 countries.

Muhammad HafizhDepartment of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar.ORCID 0000-0002-9550-5321
Md Mohiuddin SolimanDepartment of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia.ORCID 0000-0002-0268-9978
Yazan QiblaweyDepartment of Electrical Engineering, Qatar University, Doha 2713, Qatar.
Muhammad E H ChowdhuryDepartment of Electrical Engineering, Qatar University, Doha 2713, Qatar.ORCID 0000-0003-0744-8206
Mohammad Tariqul IslamCentre for Advanced Electronic and Communication Engineering, Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Selangor, Malaysia.ORCID 0000-0002-4929-3209
Farayi MusharavatiDepartment of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar.ORCID 0000-0003-0489-0090
Sakib MahmudDepartment of Electrical Engineering, Qatar University, Doha 2713, Qatar.ORCID 0000-0002-4599-2192
Amith KhandakarDepartment of Electrical Engineering, Qatar University, Doha 2713, Qatar.ORCID 0000-0001-7068-9112
Mohammad NabilDepartment of Electrical Engineering, Qatar University, Doha 2713, Qatar.
Erfan Zal NezhadDepartment of Biomedical Engineering, University of Texas at San Antonio, San Antonio, TX 78249, USA.
Qatar University · QANational University of Malaysia · MYThe University of Texas at San Antonio · US

Funding

Qatar National Research Fund NPRP11S-0102-180178
6 · The paper itself

Abstract

In this paper, a surface acoustic wave (SAW) sensor for hip implant geometry was proposed for the application of total hip replacement. A two-port SAW device was numerically investigated for implementation with an operating frequency of 872 MHz that can be used in more common radio frequency interrogator units. A finite element analysis of the device was developed for a lithium niobate (LiNBO3) substrate with a Rayleigh velocity of 3488 m/s on COMSOL Multiphysics. The Multiphysics loading and frequency results highlighted a good uniformity with numerical results. Afterwards, a hip implant geometry was developed. The SAW sensor was mounted at two locations on the implant corresponding to two regions along the shaft of the femur bone. Three discrete conditions were studied for the feasibility of the implant with upper- and lower-body loading. The loading simulations highlighted that the stresses experienced do not exceed the yield strengths. The voltage output results indicated that the SAW sensor can be implanted in the hip implant for hip implant-loosening detection applications.

Indexed as

Arthroplasty, Replacement, HipHip ProsthesisFeasibility StudiesFinite Element AnalysisNiobiumOxidesSoundlithium niobateNiobiumOxidesfinite element methodhip implantnumerical analysissurface acoustic wave (SAW)total hip implant replacement

Identifiers

PMID36671914
PMCPMC9855817
OpenAlexW4313519094

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.