Evidence map›Paper›PMID 36501616›Full record

ArticlePolymers2022

The Effect of the Addition of Copper Particles in High-Density Recycled Polyethylene Matrices by Extrusion.

Camila Arcos, Lisa Muñoz, Deborah Cordova, Hugo Muñoz, Mariana Walter, Manuel I Azócar, Ángel Leiva, Mamié Sancy, Gonzalo Rodríguez-Grau

Open access · goldAbstract read
In one paragraph

Article in Polymers, 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.

0numbers the graph read from it
0cells of the map it votes in
0citing papers in PubMed
0.3field-weighted citation impact, top 55% of its field
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

0 citing papers in PubMed, 5 citations in OpenAlex.

No citing paper in PubMed yet.

4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

9 authors at 3 institutions in 1 country.

Camila ArcosDepartamento de Ingeniería Mecánica y Metalúrgica, Facultad de Ingeniería, Pontificia Universidad Católica de Chile, Santiago 7820436, Chile.ORCID 0000-0001-6285-1319
Lisa MuñozInstituto de Química, Facultad de Ciencias, Pontificia Universidad Católica de Valparaíso, Valparaíso 2373223, Chile.ORCID 0000-0002-4588-2620
Deborah CordovaDepartamento de Química de los Materiales, Facultad de Química y Biología, Universidad de Santiago de Chile, Santiago 7820436, Chile.
Hugo MuñozDepartamento de Ingeniería Mecánica y Metalúrgica, Facultad de Ingeniería, Pontificia Universidad Católica de Chile, Santiago 7820436, Chile.ORCID 0000-0001-5091-0457
Mariana WalterDepartamento de Química de los Materiales, Facultad de Química y Biología, Universidad de Santiago de Chile, Santiago 7820436, Chile.
Manuel I AzócarDepartamento de Química de los Materiales, Facultad de Química y Biología, Universidad de Santiago de Chile, Santiago 7820436, Chile.ORCID 0000-0003-1098-4659
Ángel LeivaFacultad de Química y Farmacia, Pontificia Universidad Católica de Chile, Santiago 7820436, Chile.
Mamié SancyEscuela de Construcción Civil, Facultad de Ingeniería, Pontificia Universidad Católica de Chile, Santiago 7820436, Chile.ORCID 0000-0001-9523-2629
Gonzalo Rodríguez-GrauEscuela de Construcción Civil, Facultad de Ingeniería, Pontificia Universidad Católica de Chile, Santiago 7820436, Chile.ORCID 0000-0003-1068-3741
Pontificia Universidad Católica de Chile · CLUniversidad de Santiago de Chile · CLPontificia Universidad Católica de Valparaíso · CL

Funding

No grant is acknowledged in the PubMed record.

6 · The paper itself

Abstract

In this study, the effect of the recycling process and copper particle incorporation on virgin and recycled pellet HDPE were investigated by thermo-chemical analysis, mechanical characterization, and antibacterial analysis. Copper particles were added to pellet HDPE, virgin and recycled, using a tabletop single screw extruder. Some copper particles, called copper nano-particles (Cu-NPs), had a spherical morphology and an average particle size near 20 nm. The others had a cubic morphology and an average particle size close to 300 nm, labeled copper nano-cubes (Cu-NCs). The thermo-chemical analysis revealed that the degree of crystallization was not influenced by the recycling process: 55.38 % for virgin HDPE and 56.01% for recycled HDPE. The degree of crystallization decreased with the addition of the copper particles. Possibly due to a modification in the structure, packaging organization, and crystalline ordering, the recycled HDPE reached a degree of crystallization close to 44.78% with 0.5 wt.% copper nano-particles and close to 36.57% for the recycled HDPE modified with 0.7 wt.% Cu-NCs. Tensile tests revealed a slight reduction in the tensile strength related to the recycling process, being close to 26 MPa for the virgin HDPE and 15.99 MPa for the recycled HDPE, which was improved by adding copper particles, which were near 25.39 MPa for 0.7 wt.% copper nano-cubes. Antibacterial analysis showed a reduction in the viability of

Indexed as

differential scanning calorimetryFourier-transform infrared spectroscopyhigh-density polyethylenerecycled polymersreflectancetensile testingthermogravimetric

Identifiers

PMID36501616
PMCPMC9739686
OpenAlexW4310396501

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.