Development of activated carbon for removal of pesticides from water: case study.

The work primarily concerns development of activated carbon dedicated for adsorption of pesticides from water prior directing it to the distribution system. We provide an information on research on important practical aspects related to research carried out to develop and to manufacture activated carbons. The paper concerns preliminary works on selection raw materials, a binder used for producing granulated adsorbent, activating gases, conditions of the production process, and others. The key attention in this research was paid to its target, i.e., industrial process to produce activated carbon revealing fulfilling required properties including satisfying adsorption of selected pesticides and meeting the requirements of companies dealing with a large-scale production of drinking water. Therefore, among others, the work includes considerations concerning such aspects like pore structure and specific surface area of the activated carbon, formation of granules that are the most demanded and thus preferred in an industrial practice form of activated carbons, and other aspects important from practical point of view. Using the results of our preliminary work, a batch of granular activated carbon was produced in industrial conditions. The obtained material was tested in terms of removing several pesticides at a water treatment plant operating on an industrial scale. During tests the concentration of acetochlor ESA was decreased from ca. 0.4 µg/l in raw water to below 0.1 µg/l. During 11 months of AC use specific surface area of adsorbent lowered significantly by 164 m