Microplastic-Free Microcapsules to Encapsulate Health-Promoting Limonene Oil.

Fast-moving consumer goods (FMCG) industry has long included many appealing essential oils in products to meet consumers' needs. Among all, the demand for limonene (LM) has recently surged due to its broad-spectrum health benefits, with applications in cosmetic, detergent, and food products. However, LM is extremely volatile, hence has often been encapsulated for a longer shelf-life. To date, mostly non-biodegradable synthetic polymers have been exploited to fabricate the microcapsule shells, and the resulting microcapsules contribute to the accumulation of microplastic in the environment. So far, information on LM-entrapping microcapsules with a natural microplastic-free shell and their mechanism of formation is limited, and there is lack of an in-depth characterisation of their mechanical and adhesive properties, which are crucial for understanding their potential performance at end-use applications. The present research aims towards developing safe microcapsules with a core of LM fabricated via complex coacervation (CC) using gum Arabic (GA) and fungally sourced chitosan (fCh) as shell precursors. The encapsulation efficiency (EE) for LM was quantified by gas chromatography (GC) separation method. The morphology of microcapsules was investigated via bright-field optical microscopy and scanning electron microscopy, and their mechanical properties were characterised using a micromanipulation technique. Moreover, the adhesive properties of the resulting microcapsules were studied via a bespoke microfluidic device fitted with a polyethylene-terephthalate (PET) substrate and operating at increasingly hydrodynamic shear stress (HSS). Spherical core-shell microcapsules (EE ~45%) with a mean size of 38 ± 2 μm and a relatively smooth surface were obtained. Their mean rupture force and nominal rupture stress were 0.9 ± 0.1 mN and 2.1 ± 0.2 MPa, respectively, which are comparable to those of other microcapsules with synthetic shells, e.g., urea- and melamine-formaldehyde. It was also found that the fCh-GA complexed shell provided promising adhesive properties onto PET films, leading to a microcapsule retention of ~85% and ~60% at low (≤50 mPa) and high shear stress (0.9 Pa), respectively. Interestingly, these values are similar to the adhesion data available in literature for microplastic-based microcapsules, such as melamine-formaldehyde (50-90%). Overall, these findings suggest that microplastics-free microcapsules with a core of oil have been successfully fabricated, and can offer a potential for more sustainable, consumer- and environmentally friendly applications in FMCGs.