Evidence map›Paper›PMID 36277134›Full record

ArticleACS energy letters2022

Pyridine Controlled Tin Perovskite Crystallization.

Giuseppe Nasti, Mahmoud Hussein Aldamasy, Marion Alwine Flatken, Pellegrino Musto, Piotr Matczak, André Dallmann, Armin Hoell, Artem Musiienko, Hannes Hempel, Ece Aktas and 7 more

Open access · hybridAbstract read
In one paragraph

Article in ACS energy letters, 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 15 papers.

0numbers the graph read from it
0cells of the map it votes in
15citing papers in PubMed
7.6field-weighted citation impact, top 2% of its field
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

15 citing papers in PubMed, 86 citations in OpenAlex.

  1. Article
  2. Article
  3. Article
  4. Article
  5. Article
  6. Article
  7. Article
  8. Article
  9. Article
  10. Review
  11. Article
  12. Article
  13. Review
  14. Review
  15. Review
4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

17 authors at 7 institutions in 5 countries.

Giuseppe NastiDepartment of Chemical Materials and Production Engineering, University of Naples Federico II, Piazzale Vincenzo Tecchio 80, 80125 Naples, Italy.ORCID https://orcid.org/0000-0003-0867-2402
Mahmoud Hussein AldamasyDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.
Marion Alwine FlatkenDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.ORCID https://orcid.org/0000-0003-2653-4468
Pellegrino MustoNational Research Council of Italy Institute for Polymers Composites and Biomaterials, Via Campi Flegrei 34, 80078 Pozzuoli (NA), Italy.
Piotr MatczakFaculty of Chemistry, University of Łódź́́́, 90-149 Lodz, Poland.
André DallmannHumboldt Universität zu Berlin, Institut für Chemie, Brook-Taylor-Str. 2, 12489 Berlin, Germany.
Armin HoellDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.ORCID https://orcid.org/0000-0002-7080-8393
Artem MusiienkoDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.ORCID https://orcid.org/0000-0002-2259-8387
Hannes HempelDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.
Ece AktasDepartment of Chemical Materials and Production Engineering, University of Naples Federico II, Piazzale Vincenzo Tecchio 80, 80125 Naples, Italy.ORCID https://orcid.org/0000-0002-4381-4456
Diego Di GirolamoDepartment of Chemical Materials and Production Engineering, University of Naples Federico II, Piazzale Vincenzo Tecchio 80, 80125 Naples, Italy.ORCID https://orcid.org/0000-0001-6307-1138
Jorge PascualDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.ORCID https://orcid.org/0000-0001-6486-0737
Guixiang LiDepartment of Novel Materials and Interfaces for Photovoltaic Solar Cells, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.ORCID https://orcid.org/0000-0002-8730-0713
Meng LiKey Lab for Special Functional Materials of Ministry of Education, National and Local Joint Engineering Research Center for High-Efficiency Display and Lighting Technology, School of Materials Science and Engineering, Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004 China.ORCID https://orcid.org/0000-0003-0360-7791
Lucia Vittoria MercaldoItalian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) - Portici Research Center, Piazzale E. Fermi, 80055 Portici (NA), Italy.ORCID https://orcid.org/0000-0002-7286-5236
Paola Delli VeneriItalian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) - Portici Research Center, Piazzale E. Fermi, 80055 Portici (NA), Italy.
Antonio AbateDepartment of Chemical Materials and Production Engineering, University of Naples Federico II, Piazzale Vincenzo Tecchio 80, 80125 Naples, Italy.ORCID https://orcid.org/0000-0002-3012-3541
Helmholtz-Zentrum Berlin für Materialien und Energie · DEUniversity of Naples Federico II · ITNational Agency for New Technologies, Energy and Sustainable Economic Development · ITHenan University · CNHumboldt-Universität zu Berlin · DENational Research Council · ITUniversity of Łódź · PL

Funding

No grant is acknowledged in the PubMed record.

6 · The paper itself

Abstract

Controlling the crystallization of perovskite in a thin film is essential in making solar cells. Processing tin-based perovskite films from solution is challenging because of the uncontrollable faster crystallization of tin than the most used lead perovskite. The best performing devices are prepared by depositing perovskite from dimethyl sulfoxide because it slows down the assembly of the tin-iodine network that forms perovskite. However, while dimethyl sulfoxide seems the best solution to control the crystallization, it oxidizes tin during processing. This work demonstrates that 4-(

Identifiers

PMID36277134
PMCPMC9578040
OpenAlexW4294053526

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.