ArticlePolymers2022
Development of a Custom-Made 3D Printing Protocol with Commercial Resins for Manufacturing Microfluidic Devices.
Article in Polymers, 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 8 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
8 citing papers in PubMed.
- 3D-Printed Microfluidic Chip System with Integrated Fluidic Breakers and Phaseguide Fluid Structures for Optimal Passive Mixing.Micromachines · 2026Article
- A 3D-printed handheld microfluidic device for sensitive and low-cost on-site immunodetection.Mikrochimica acta · 2025Article
- Article
- Optimization of LCD-Based 3D Printing for the Development of Clotrimazole-Coated Microneedle Systems.Materials (Basel, Switzerland) · 2025Article
- Design considerations for digital light processing bioprinters.Applied physics reviews · 2024Review
- Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications.Lab on a chip · 2023Review
- Fabricating a dielectrophoretic microfluidic device using 3D-printed moulds and silver conductive paint.Scientific reports · 2023Article
- Combining 3D Printing and Microfluidic Techniques: A Powerful Synergy for Nanomedicine.Pharmaceuticals (Basel, Switzerland) · 2023Review
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
6 authors.
Funding
Abstract
The combination of microfluidics and photo-polymerization techniques such as stereolithography (SLA) has emerged as a new field which has a lot of potential to influence in such important areas as biological analysis, and chemical detection among others. However, the integration between them is still at an early stage of development. In this article, after analyzing the resolution of a custom SLA 3D printer with commercial resins, microfluidic devices were manufactured using three different approaches. First, printing a mold with the objective of creating a Polydimethylsiloxane (PDMS) replica with the microfluidic channels; secondly, open channels have been printed and then assembled with a flat cover of the same resin material. Finally, a closed microfluidic device has also been produced in a single process of printing. Important results for 3D printing with commercial resins have been achieved by only printing one layer on top of the channel. All microfluidic devices have been tested successfully for pressure-driven fluid flow.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.