ArticlePolymers2022
A Green Resin Wood Adhesive from Synthetic Polyamide Crosslinking with Glyoxal.
Article in Polymers, 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 2 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
2 citing papers in PubMed.
- A Glyoxal Based Co-Condensation Adhesive with Excellent Water Resistance Using Chitosan and Starch as Enhanced Agents.Polymers · 2026Article
- Approaching Self-Bonded Medium Density Fiberboards Made by Mixing Steam ExplodedMaterials (Basel, Switzerland) · 2023Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
6 authors.
Funding
Abstract
Glyoxal is considered to be the most likely substitute for formaldehyde to synthesize resin adhesives for wood bonding due to its reactivity, structural characteristics, being non-toxic, low volatility, and acceptable cost. Regrettably, the performance of the resin synthesized using glyoxal to directly replace all formaldehyde is not totally satisfactory, especially as it has almost no water resistance. This makes such a simple alternative fail to be suitable for industrial production. To prepare an environment-friendly glyoxal-based adhesive with good bonding performance, the work presented here relies first on reacting citric acid and hexamethylene diamine, producing a polyamide, with glyoxal, and then crosslinking it, thus synthesizing a thermosetting resin (namely CHG) adhesive and applying it for plywood bonding. The plywood prepared exhibits excellent dry and wet shear strength, which are better than GB/T9846-2015 standard requirements (≥0.7 MPa), and even after being soaked in hot water at 63 °C for 3 h, its strength is still as high as 1.35 MPa. The CHG resin is then potentially an adhesive for industrial application for replacing UF (urea-formaldehyde) and MUF (melamine-urea-formaldehyde) adhesives for wood composites.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.