Hydrocalumite as well as the Formation of Scheelite Induced by Its Dissolution, Removing Aqueous Tungsten with Varying Concentrations.

As a toxic element, tungsten (W) in elevated concentrations, originating from human activities or geological sources, poses a severe threat to the environment. However, there has been a lack of robust remediation techniques focusing on aqueous tungsten contamination with varying initial concentrations, because only recently have the toxicity and the environmental threat of tungsten been fully realized. In this study, the removal of tungsten from an aqueous solution by hydrocalumite was investigated for the first time. Systematic removal experiments were carried out at designated contact time, temperature, and initial tungsten concentration. The results showed that hydrocalumite is capable of effectively removing tungsten under various conditions, especially at high initial tungsten concentrations, with the maximum uptake capacity being up to 1120.5 mg (tungsten)/g (hydrocalumite). The mechanisms of tungsten removal were studied based on the measured chemical compositions of the solution samples and their PHREEQC simulations as well as the solid sample characterization by XRD, SEM-EDX, and XPS. At low initial tungsten concentrations (below 1 mmol/L), anion exchange between the tungsten in solution and the Cl in the hydrocalumite interlayers played a critical role in tungsten removal. At high initial tungsten concentrations (higher than 5 mmol/L), the removal of W from the solution was solely caused by the precipitation of scheelite (CaWO