ArticleMaterials (Basel, Switzerland)2022
Multiobjective Optimization of Cutting Parameters for TA10 Alloy Deep-Hole Drilling.
Article in Materials (Basel, Switzerland), 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 2 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
2 citing papers in PubMed.
- Experimental Investigation and Modeling of Surface Roughness in BTA Deep Hole Drilling with Vibration Assisted.Materials (Basel, Switzerland) · 2024Article
- Analytical Model of Hole Diameter and Self-Guiding Machining Mechanism of BTA Deep Hole Drilling.Materials (Basel, Switzerland) · 2022Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
4 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
In order to obtain better quality TA10 pipes, the Boring and Trepanning Association (BTA) deep-hole drilling process is used. However, this type of machining leads to difficult chip removal, tool wear, and poor hole-surface quality. In this study, a deep-hole drilling experiment was conducted on TA10 workpieces using the designed tool with different process parameters, and the process parameters were optimized by machining results with multiple objectives such as chip morphologies, tool wear, hole-axis deflection, and hole surface roughness. The results show that different process parameters have a great impact on the cutting process, with a higher feed resulting in smoother chip removal and a lower spindle speed resulting in lighter tool wear and less hole axis deflection. When the spindle speed is 145 r/min and the feed is 0.12 mm/r, the machined TA10 pipe meets both the accuracy requirement of roughness and the machining efficiency.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.