ArticlePolymers2022
The Influence of the Printing Temperature and the Filament Color on the Dimensional Accuracy, Tensile Strength, and Friction Performance of FFF-Printed PLA Specimens.
Article in Polymers, 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 23 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
23 citing papers in PubMed.
- The Impact of Coloring Additives on Thermal, Mechanical, and Tribological Properties of FDM-Printed Components.Polymers · 2026Article
- Process-Structure Relationships Governing Dimensional Accuracy in Material-Extrusion-Printed PLA-Based Composites.Polymers · 2026Article
- Article
- Effect of Radiation up to 30 MGy on Mechanical and Dielectric Properties of Polymers for Superconducting and Resistive Magnets.Polymers · 2026Article
- Article
- Ecological Composite Materials Based on Polylactide (PLA) and Organic Fillers: Coffee Grounds and Hen Eggshells Produced by the FDM Method: Mechanical, Thermal Properties, Stress Relaxation and Creep.Materials (Basel, Switzerland) · 2025Article
- Advances in 3D-Printed Drug Delivery and Screening Platforms for Bone Disease Therapy.Pharmaceutics · 2025Review
- Article
- Article
- Additive Manufacturing Meets Gear Mechanics: Understanding Abrasive Wear Evolution in FDM-Printed Gears.Polymers · 2025Article
- Waste Coffee Silver Skin as a Natural Filler in PLA-Based Filaments for Fused Filament Fabrication (FFF) Printing.Polymers · 2025Article
- Comparative Analysis of Dimensional Accuracy in PLA-Based 3D Printing: Effects of Key Printing Parameters and Related Variables.Polymers · 2025Article
- Optimization of Printing Parameters for Self-Lubricating Polymeric Materials Fabricated via Fused Deposition Modelling.Polymers · 2025Article
- Elasticity in Porous 3D-Printed Polylactic Acid Scaffolds for Biomedical Applications: A Predictive Approach.Polymers · 2025Article
- Analyzing the effects of printing parameters to minimize the dimensional deviation of polylactic acid parts by applying three different decision-making approaches.Scientific reports · 2024Article
- Influence of Carbonyl Iron Particles (CIP) and Glass Microspheres on Thermal Properties of Poly(lactic acid) (PLA).Polymers · 2024Article
- Analyzing Sustainable 3D Printing Processes: Mechanical, Thermal, and Crystallographic Insights.Polymers · 2024Article
- Effects of thermomechanical parameters on surface texture in filament materials extrusion: outlook and trends.F1000Research · 2024Review
- Fused Deposition Modelling (FDM) of Thermoplastic-Based Filaments: Process and Rheological Properties-An Overview.Materials (Basel, Switzerland) · 2023Review
- Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
7 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
The printing variable least addressed in previous research aiming to reveal the effect of the FFF process parameters on the printed PLA part's quality and properties is the filament color. Moreover, the color of the PLA, as well as its manufacturer, are rarely mentioned when the experimental conditions for the printing of the samples are described, although current existing data reveal that their influence on the final characteristics of the print should not be neglected. In order to point out the importance of this influential parameter, a natural and a black-colored PLA filament, produced by the same manufacturer, were selected. The dimensional accuracy, tensile strength, and friction properties of the samples were analyzed and compared for printing temperatures ranging from 200 °C up to 240 °C. The experimental results clearly showed different characteristics depending on the polymer color of samples printed under the same conditions. Therefore, the optimization of the FFF process parameters for the 3D-printing of PLA should always start with the proper selection of the type of the PLA material, regarding both its color and the fabricant.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.