AFM Characterization of Temperature Effect on the SU-8 Mechanical and Tribological Properties.

This study presents the effect of temperature on the mechanical and tribological properties of SU-8 polymer. The temperature of investigated samples increasing during testing and the variation of mechanical and tribological properties were monitored. The samples for tests were SU-8 hard baked at different temperatures. The hard bake temperature changes the mechanical and tribological properties of polymers. The aim of this research work is the reliability design improvement of SU-8 microstructures from electro-thermally actuated devices where a thermal gradient produces the softening and modification of SU-8 behavior. As a function of the hard baked temperature, different mechanical and tribological properties were experimentally determined using the atomic force microscopy (AFM) technique. The mechanical properties of interest are the modulus of elasticity and hardness. The investigated tribological properties involve the adhesion and friction forces. The modulus of elasticity and hardness decrease if the operating temperature increases based on the thermal relaxation of material and their viscoelastic behavior. The adhesion force between AFM tip and investigated samples increases if the operating temperature increases, respectively. The same evolution was experimentally observed in the case of friction force. Moreover, for the same testing temperature, the modulus of elasticity and hardness increase, and the adhesion and friction forces decrease if the SU-8 is hard baked at high temperature.