ReviewPolymers2022
The Influence of the Process Parameters on the Mechanical Properties of PLA Specimens Produced by Fused Filament Fabrication-A Review.
Review in Polymers, 2022. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 48 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
48 citing papers in PubMed.
- Interlocking Interfaces for Enhanced Mechanical Properties in Bi-Component 3D Printing of Biodegradable Materials.Micromachines · 2026Article
- CBCT in Dental Research: Is Complexity Necessary? An Exploratory Proof-of-Concept Study.Journal of functional biomaterials · 2026Article
- Functional Materials for Additive Manufacturing: Materials Design, Processing, and Emerging Applications.Nanomaterials (Basel, Switzerland) · 2026Review
- Advances in Additive Manufacturing Electrochemistry.Chemical reviews · 2026Review
- Article
- Frequency-Dependent Effects of Material Extrusion Parameters on the Storage Modulus and Loss Factor of PETG.Polymers · 2026Article
- The Influence of Certain Operating Conditions of the FDM Process on the Mechanical Properties of Polymeric Materials-A Review.Polymers · 2026Review
- Unveiling the effects of printing parameters on the fracture behavior of 3D-printed acrylonitrile butadiene styrene via the essential work of fracture.Scientific reports · 2026Article
- Generative Design of 3D-Printed Biomimetic Interlocking Blocks Inspired by the Cellular 3D Puzzle Structure of the Walnut Shell.Biomimetics (Basel, Switzerland) · 2026Article
- Dimensional Fidelity and Slicer Mass Prediction Bias in FFF-Printed UAV Micro-Frames: A Material-Dependent Comparative Study.Materials (Basel, Switzerland) · 2026Article
- Article
- Multi-Objective Optimization of Mechanical and Geometric Properties of 3D-Printed PLA Porous Scaffolds for Biomedical Applications.Materials (Basel, Switzerland) · 2026Article
- Experimental and Numerical Investigation of Mechanical Properties of Hyper Polylactic Acid (HPLA).Polymers · 2026Article
- Thermo-Mechanical and Fatigue Behavior of 3D-Printed PA12 CF15 for Engineering Application.Polymers · 2026Article
- Article
- Optimized 3D-Printed Polylactic Acid/Graphene Oxide Scaffolds for Enhanced Bone Regeneration.Bioengineering (Basel, Switzerland) · 2025Article
- Article
- Determination of Dynamic Elastic Properties of 3D-Printed Nylon 12CF Using Impulse Excitation of Vibration.Polymers · 2025Article
- Article
- Electrospun PLA/DTAC Bicomponent Membranes for Low-Resistance and Antibacterial Air Filtration.Polymers · 2025Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
4 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
Polylactic acid (PLA) is produced from renewable materials, has a low melting temperature and has a low carbon footprint. These advantages have led to the extensive use of polylactic acid in additive manufacturing, particularly by fused filament fabrication (FFF). PLA parts that are 3D printed for industrial applications require stable mechanical properties and predictability regarding their dependence on the process parameters. Therefore, the development of the FFF process has been continuously accompanied by the development of software packages that generate CNC codes for the printers. A large number of user-controllable process parameters have been introduced in these software packages. In this respect, a lot of articles in the specialized literature address the issue of the influence of the process parameters on the mechanical properties of 3D-printed specimens. A systematic review of the research targeting the influence of process parameters on the mechanical properties of PLA specimens additively manufactured by fused filament fabrication was carried out by the authors of this paper. Six process parameters (layer thickness, printing speed, printing temperature, build plate temperature, build orientation and raster angle) were followed. The mechanical behavior was evaluated by tensile, compressive and bending properties.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.