Use of COVID-19 single-use face masks to improve the rutting resistance of asphalt pavement.

Today, the world faces an enormous increase in plastic waste pollution caused by the emergence of the COVID-19 pandemic. Plastic pollution has been already one of the greatest threats to our planet before the Coronavirus outbreak. The disposal of millions of personal protective equipment (PPE) in the form of face masks has significantly contributed to the generation of plastic waste and has exacerbated plastic pollution. In an attempt to mitigate pollution caused by the excess PPE waste, an innovative way was developed in this research to reduce pandemic-generated wastes by using the shredded face mask (SFM) fibers as an additive to hot mix asphalt (HMA) to enhance rutting resistance. Rutting or permanent deformation is one of the major distresses of asphalt pavement. Since the SFM behaves as a semi-liquid between 115.5 and 160 °C, which is in the range of HMA mixing and paving temperature, it can function as a binding agent to glue the aggregates. When the pavement is cooled down to ambient temperature, the hardened SFM can provide stability and stiffness to HMA. Based on the results of this study, the modified mixes exhibited excellent resistance to permanent deformation under the Asphalt Pavement Analyzer (APA), as rutting depth values were reduced from 3.0 mm to 0.93 mm by increasing the SFM content from 0% to 1.5%. From the rutting test results and premature distress mechanism study, the appropriate addition of SFM modifiers could improve the high-temperature properties of HMA that can be used to strengthen high-compression and shearing zones in the pavement structure.