Effect of Corrosive Media on the Chemical and Mechanical Resistance of IPS e.max

The influence of 4% acetic acid (pH~2.4) and an alkaline solution of NaOH (pH~10) on the corrosion resistance and micromechanical properties of disilicate crystals containing glass-ceramics (LS2-GC's) is studied. Partially crystallized lithium metasilicate crystal containing glass-ceramics (LS-GC's) are annealed to fully LS2-GC's using a one stage and a two-stage heating to induce nucleation. Materials with various chemical and wear resistance are prepared. The content of the crystalline phase in the material annealed in the two-stage process A is 60.0% and increases to 72.2% for the material heated in the one-stage process B. The main elements leached in the acidic medium are lithium and phosphorus, while lithium, silicon, and phosphorus leached into the alkaline environment. Material B exhibits better chemical resistance to the corrosive influence of 4% acetic acid under quasi-dynamic conditions. In the alkaline corrosion medium, silicon is leached from material A faster compared to the material B. After prolonged exposure to acidic or basic environments, both materials show evidence of surface structural changes. A decrease of the sliding wear resistance is observed after corrosion in the acidic environment under dynamic conditions. In both materials, the wear rate increases after corrosion.