Evidence map›Paper›PMID 35009253›Full record

ArticleMaterials (Basel, Switzerland)2021

Enhanced Hydrofobicity of Polymers for Personal Protective Equipment Achieved by Chemical and Physical Modification.

Emilia Irzmańska, Ewa Korzeniewska, Ryszard Pawlak, Mariusz Tomczyk, Aleksandra Smejda-Krzewicka, Agnieszka Adamus-Włodarczyk

Open access · goldAbstract read
In one paragraph

Article in Materials (Basel, Switzerland), 2021. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 6 papers.

0numbers the graph read from it
0cells of the map it votes in
6citing papers in PubMed
0.7field-weighted citation impact, top 33% of its field
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

6 citing papers in PubMed, 10 citations in OpenAlex.

  1. Article
  2. Article
  3. Article
  4. Article
  5. Article
  6. Article
4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

6 authors at 2 institutions in 1 country.

Emilia IrzmańskaCentral Institute for Labour Protection, Department of Personal Protective Equipment, National Research Institute (CIOP-PIB), Wierzbowa 48 Str., 90-133 Lodz, Poland.
Ewa KorzeniewskaInstitute of Electrical Engineering Systems, Lodz University of Technology, Stefanowskiego 18 Str., 90-537 Lodz, Poland.ORCID 0000-0002-0766-1376
Ryszard PawlakInstitute of Electrical Engineering Systems, Lodz University of Technology, Stefanowskiego 18 Str., 90-537 Lodz, Poland.ORCID 0000-0002-0609-7865
Mariusz TomczykInstitute of Electrical Engineering Systems, Lodz University of Technology, Stefanowskiego 18 Str., 90-537 Lodz, Poland.
Aleksandra Smejda-KrzewickaInstitute of Polymer and Dye Technology, Lodz University of Technology, Stafanowskiego 16 Str., 90-537 Lodz, Poland.ORCID 0000-0001-7720-1773
Agnieszka Adamus-WłodarczykCentral Institute for Labour Protection, Department of Personal Protective Equipment, National Research Institute (CIOP-PIB), Wierzbowa 48 Str., 90-133 Lodz, Poland.
Lodz University of Technology · PLCentral Institute for Labour Protection · PL

Funding

National Centre for Research and Development III.PB.12.
6 · The paper itself

Abstract

The article presents significant results in research on creating superhydrophobic properties of materials which can be used as an interesting material for use in self-cleaning polymer protective gloves and similar applications where the superhydrophobicity plays a significant role. In this work the influence of laser surface modification of MVQ silicone rubber was investigated. The research was conducted using a nanosecond-pulsed laser at 1060 nm wavelength. After a process of laser ablation, the surface condition was examined using a SEM microscope and infrared spectroscopy. During the tests, the contact angle was checked both before and after the laser modification of samples pre-geometrised in the process of their production. The test results presented in the paper indicate that the chemical and physical modifications contribute to the change in the MVQ silicone rubber contact angle. A significant increase (by more than 30°) in the contact angle to 138° was observed. It was confirmed that surface geometrisation is not the only factor contributing to an increase in the contact angle of the analyzed material; other factors include a change in laser texturing parameters, such as mean beam power, pulse duration, scanning speed and pulse repetition frequency.

Indexed as

chemical modificationhydrofobicitylaser ablationpolymerprotective gloves

Identifiers

PMID35009253
PMCPMC8746267
OpenAlexW4200478940

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.