Particle formation due to brake wear, influence on the people health and measures for their reduction: a review.

For achieving the desired vehicle speed, the IC engine is very important, while for further vehicle speed maintaining and adaptation to road conditions, the braking system is important. With each brake's activation, wear products are forming, which are very harmful to the environment, because they can contain heavy metals. The braking working parameters (initial speed and braking pressure) are beside the achieved temperature in contact par, the most responsible, for particle formation and their release into the air. The particles forming can be divided by size on coarse, fine, and ultrafine particles, and which were observed in the paper. However, the greatest accent was placed on coarse and fine particles. For the determination of the composition of wear products, most often, laboratory tests were used. Particle composition greatly depends on the composition of brake pads, which can consist of about 30 components, and where some of these components have very unfavourable effects on people's health. So today, many researches are focused on finding such composition for brake pads, which will wear as less as possible, without disturbing the basic tribological properties. The conclusion of this paper shows that the applied materials for manufacturing the braking system are very important, as well as the construction, for the reduction of particle emission.