Preferential removal of benzene, toluene, ethylbenzene, and xylene (BTEX) by persulfate in ethanol-containing aquifer materials.

The effective approaches to eliminate impacts of ethanol on the biodegradation of benzene, toluene, ethylbenzene, and xylene (BTEX) are concerned in the bioremediation of groundwater contaminated with ethanol-blended gasoline. In situ chemical oxidation (ISCO) is a common technique widely used for the remediation of contaminated groundwater. However, the selectivity of ISCO for BTEX and ethanol removal is poorly understood. Therefore, a batch experiment was performed with different aquifer materials, including calcareous soil, basalt soil, granite soil, dolomite, and sand. Gasoline was used to provide dissolved BTEX and ethanol reagent was used as additive to improve the quality of gasoline and to reduce the possibility of air pollution caused by gasoline. Persulfate (PS) was used as a chemical oxidant to oxidize organic contaminants. The target concentrations of BTEX and ethanol were 20 mg/L and 1000 mg/L, respectively. The results showed that ethanol could be preferentially degraded in the absence of PS and inhibit BTEX biodegradation. However, BTEX could be preferentially removed prior to ethanol in all aquifer materials used at ambient temperature, when PS was added at a PS/BTEX molar ratio of 150. Over 94% BTEX in sand, dolomite, and granite soil was preferentially removed with the first-order decay rate constants of 0.890-2.703 day