ArticlePolymers2021
Quality of Surface Texture and Mechanical Properties of PLA and PA-Based Material Reinforced with Carbon Fibers Manufactured by FDM and CFF 3D Printing Technologies.
Article in Polymers, 2021. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 21 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
21 citing papers in PubMed.
- Toward Zero-Support Design for Irregular Manifold Manufacturing with Composite Materials Based on Layered Adhesion Equalization.3D printing and additive manufacturing · 2026Article
- Influence of Printing Orientation on Tensile Strength and Surface Characterization of a Steel-Powder-Reinforced Thermoplastic Composite Manufactured by FDM Technology.Materials (Basel, Switzerland) · 2025Article
- Influence of Surface Texture in Additively Manufactured Biocompatible Materials and Triboelectric Behavior.Materials (Basel, Switzerland) · 2025Review
- Enhancing Fatigue Resistance of Polylactic Acid through Natural Reinforcement in Material Extrusion.Polymers · 2024Article
- Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA-aluminum.Heliyon · 2024Article
- Selected Mechanical and Rheological Properties of Medical Resin MED610 in PolyJet Matrix Three-Dimensional Printing Technology in Quality Aspects.3D printing and additive manufacturing · 2024Article
- Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials.Polymers · 2023Article
- Design and Behavior of Lightweight Flexible Structure with Spatial Pattern Reducing Contact Surface Fraction.Polymers · 2023Article
- Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites.Polymers · 2023Article
- Optimization of Printing Parameters to Enhance Tensile Properties of ABS and Nylon Produced by Fused Filament Fabrication.Polymers · 2023Article
- Article
- Investigation and Optimization of Effects of 3D Printer Process Parameters on Performance Parameters.Materials (Basel, Switzerland) · 2023Article
- The Mechanical Properties of Thin-Walled Specimens Printed from a Bronze-Filled PLA-Based Composite Filament Using Fused Deposition Modelling.Materials (Basel, Switzerland) · 2023Article
- Multiscale Data Treatment in Additive Manufacturing.Materials (Basel, Switzerland) · 2023Article
- Effects of Post-UV-Curing on the Flexural and Absorptive Behaviour of FDM-3D-Printed Poly(lactic acid) Parts.Polymers · 2023Article
- Article
- A Comparative Study of the Mechanical Properties of FDM 3D Prints Made of PLA and Carbon Fiber-Reinforced PLA for Thin-Walled Applications.Materials (Basel, Switzerland) · 2021Article
- Morphology of Models Manufactured by SLM Technology and the Ti6Al4V Titanium Alloy Designed for Medical Applications.Materials (Basel, Switzerland) · 2021Article
- 3D Printed Hollow Off-Axis Profiles Based on Carbon Fiber-Reinforced Polymers: Mechanical Testing and Finite Element Method Analysis.Polymers · 2021Article
- Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
5 authors.
Funding
Abstract
The paper presents the results of mechanical tests of models manufactured with two 3D printing technologies, FDM and CFF. Both technologies use PLA or PA-based materials reinforced with carbon fibers. The work includes both uniaxial tensile tests of the tested materials and metrological measurements of surfaces produced with two 3D printing technologies. The test results showed a significant influence of the type of technology on the strength of the models built and on the quality of the technological surface layer. After the analysis of the parameters of the primary profile, roughness and waviness, it can be clearly stated that the quality of the technological surface layer is much better for the models made with the CFF technology compared to the FDM technology. Furthermore, the tensile strength of the models manufactured of carbon fiber-enriched material is much higher for samples made with CFF technology compared to FDM.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.