Amine-Functionalized Nanoporous Silica Monoliths for Heterogeneous Catalysis of the Knoevenagel Condensation in Flow.

Porous carrier materials functionalized with organocatalysts offer substantial advantages compared to homogeneous catalysts, e.g., easy separation of the catalyst, scalability, and an improved implementation in continuous operations. Here, we report the immobilization of (3-aminopropyl)trimethoxysilane (APTMS) onto self-prepared silica monoliths and its application as a heterogeneous catalyst in the Knoevenagel condensation between cyano ethylacetate and various aromatic aldehydes under continuous-flow conditions. The meso-macroporous silica monoliths (6-7 cm in length) were optimized to be used in flow taking advantage of their hierarchical meso- and macroporosity. The monoliths were cladded with a poly(ether ether ketone) (PEEK) tube by a refined procedure to guarantee tight connection between the carrier material and PEEK. Functionalization of the bare silica monoliths consisting of APTMS can be efficiently performed in flow in ethanol and toluene. While a large grafting gradient is obtained for toluene, the grafting in ethanol proceeds homogenously throughout the monolith, as evidenced by elemental analysis and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The silica monoliths exhibit high conversion up to 95% with concurrent low back pressures, which is of importance in flow catalysis. By connecting two monoliths, high conversions can be maintained for several flow rates. Two types of monoliths were synthesized, possessing different mesopore sizes. The monolith bearing the larger mesopore size showed an enhanced turnover frequency (TOF), while the monolith with the smaller mesopores allowed for larger quantities of the product to be synthesized, due to the higher surface area. A long-term stability test showed that the functionalized monoliths were still active after 66 h of continuous usage, while the overall yield decreased over time.