ArticleMaterials (Basel, Switzerland)2020
Experimental Study on Influence of Curing Time on Strength Behavior of SLA-Printed Samples Loaded with Different Strain Rates.
Article in Materials (Basel, Switzerland), 2020. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 18 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
18 citing papers in PubMed.
- Investigation of the Mechanical Properties of a Ceramic Material Fabricated Using Additive Manufacturing Technology.Materials (Basel, Switzerland) · 2025Article
- Three-Dimensional Surgical Guides in Orthodontics: The Present and the Future.Dentistry journal · 2025Review
- Adaptable Manufacturing and Biofabrication of Milliscale Organ Chips With Perfusable Vascular Beds.Biotechnology journal · 2024Article
- Quick-Delivery Mold Fabricated via Stereolithography to Enhance Manufacturing Efficiency.Micromachines · 2024Article
- Review
- Article
- Determination of vat-photopolymerization parameters for microneedles fabrication and characterization of HPMC/PVP K90 dissolving microneedles utilizing 3D-printed mold.Scientific reports · 2024Article
- Article
- A Review of 3D Printing Technology in Pharmaceutics: Technology and Applications, Now and Future.Pharmaceutics · 2023Review
- Comparison of the Compression and Tensile Modulus of Two Chosen Resins Used in Dentistry for 3D Printing.Materials (Basel, Switzerland) · 2022Article
- Bonding and Strengthening the PLA Biopolymer in Multi-Material Additive Manufacturing.Materials (Basel, Switzerland) · 2022Review
- Low-Cost Cranioplasty-A Systematic Review of 3D Printing in Medicine.Materials (Basel, Switzerland) · 2022Review
- Experimental Investigation of the Tensile Behavior of Selected Tire Cords Using Novel Testing Equipment.Materials (Basel, Switzerland) · 2022Article
- Article
- Synthesis of Silver Nanocomposites for Stereolithography: In Situ Formation of Nanoparticles.Polymers · 2022Article
- 3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA).Polymers · 2021Review
- Effect of Post-Process Curing and Washing Time on Mechanical Properties of mSLA Printouts.Materials (Basel, Switzerland) · 2021Article
- Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications.Polymers · 2021Review
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
3 authors.
Funding
Abstract
Stereolithography (SLA) is an additive manufacturing process based on the photocuring of resins with the use of UV light. The printed samples can be used not only for the visualization of structures, but also to develop elements of real constructions. In the study, SLA-printed samples made of Formlabs' Durable Resin were tested in static, dynamic, and Hopkinson's bar tests. The recommended UV and heat curing time for this resin is 60 min for each process. For the tests, 5-minute and 30-min curing times were also considered. The obtained stress-strain curves were compared. The resin showed a difference in response to the strain rate effect and a curing time influence was noticed. For the static tests, the post-curing time had the greatest effect with a very small standard deviation. For the dynamic tests, similar dependencies were observed but with a greater standard deviation. The tests at very high strain rates were associated with a much greater level of difficulty in execution, recording, and signal analyzing, and the influence of the exposure time on the mechanical properties was not straightforward. The tested resin showed strengthening with increases in the strain rate as well as in the curing time.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.