Predictive mechanics-based model for depth of cut (DOC) of waterjet in soft tissue for waterjet-assisted medical applications.

The use of waterjet technology is now prevalent in medical applications including surgery, soft tissue resection, bone cutting, waterjet steerable needles, and wound debridement. The depth of the cut (DOC) of a waterjet in soft tissue is an important parameter that should be predicted in these applications. For instance, for waterjet-assisted surgery, selective cutting of tissue layers is a must to avoid damage to deeper tissue layers. For our proposed fracture-directed waterjet steerable needles, predicting the cut depth of the waterjet in soft tissue is important to develop an accurate motion model, as well as control algorithms for this class of steerable needles. To date, most of the proposed models are only valid in the conditions of the experiments and if the soft tissue or the system properties change, the models will become invalid. The model proposed in this paper is formulated to allow for variation in parameters related to both the waterjet geometry and the tissue. In this paper, first the cut depths of waterjet in soft tissue simulants are measured experimentally, and the effect of tissue stiffness, waterjet velocity, and nozzle diameter are studied on DOC. Then, a model based on the properties of the tissue and the waterjet is proposed to predict the DOC of waterjet in soft tissue. In order to verify the model, soft tissue properties (constitutive response and fracture toughness) are measured using low strain rate compression tests, Split-Hopkinson-Pressure-Bar (SHPB) tests, and fracture toughness tests. The results show that the proposed model can predict the DOC of waterjet in soft tissue with acceptable accuracy if the tissue and waterjet properties are known. Graphical Abstract (Left) An overview of the problems of traditional steerable needles and the solutions provided by waterjet steerable needles. (A) Traditional tip-steerable needles and tip-bent needles suffer from poor curvature, especially in soft tissues. (B) Traditional steerable needles are unable to accomplish many bends because the cutting force only results from drastic tissue deformation. (C) The first step for realization of waterjet steerable needles is to understand and model the interaction between waterjet and soft tissues at the tip (predictive model for depth of cut). (D) Then, the equilibrium between shapes cut in the tissue and the straight elastic needle should be understood. (Right) Waterjet steerable needles in which the direction of the tissue fracture is contr olled by waterjet and then the flexible needle follows. The first step for waterjet steerable needle realization is to predict the depth of waterjet cut.