ArticlePolymers2019
Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites.
Article in Polymers, 2019. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 29 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
29 citing papers in PubMed.
- A Guide for Industrial Needleless Electrospinning of Synthetic and Hybrid Nanofibers.Polymers · 2025Article
- Evaluating the efficacy of uniformly designed square mesh resin 3D printed scaffolds in directing the orientation of electrospun PCL nanofibers.Scientific reports · 2024Article
- Article
- PVA-Based Electrospun Materials-A Promising Route to Designing Nanofiber Mats with Desired Morphological Shape-A Review.International journal of molecular sciences · 2024Review
- 3D-Printed Materials for Wastewater Treatment.JACS Au · 2023Review
- Article
- Emerging Strategies for the Biofabrication of Multilayer Composite Amniotic Membranes for Biomedical Applications.International journal of molecular sciences · 2023Review
- Homogeneity of Needleless Electrospun Nanofiber Mats.Nanomaterials (Basel, Switzerland) · 2023Article
- Electrospun Magnetic Nanofiber Mats for Magnetic Hyperthermia in Cancer Treatment Applications-Technology, Mechanism, and Materials.Polymers · 2023Review
- Electrospinning of Biomedical Nanofibers/Nanomembranes: Effects of Process Parameters.Polymers · 2022Review
- Article
- Characterization and Filtration Efficiency of Sustainable PLA Fibers Obtained via a Hybrid 3D-Printed/Electrospinning Technique.Materials (Basel, Switzerland) · 2021Article
- Article
- Morphology of Models Manufactured by SLM Technology and the Ti6Al4V Titanium Alloy Designed for Medical Applications.Materials (Basel, Switzerland) · 2021Article
- Optimization of the Projection Microstereolithography Process for a Photocurable Biomass-Based Resin.3D printing and additive manufacturing · 2021Article
- Viscoelastic Properties of Cell Structures Manufactured Using a Photo-Curable Additive Technology-PJM.Polymers · 2021Article
- Application of Electrospun Nanofibers for Fabrication of Versatile and Highly Efficient Electrochemical Devices: A Review.Polymers · 2021Review
- Multiscale Analysis of Surface Texture Quality of Models Manufactured by Laser Powder-Bed Fusion Technology and Machining from 316L Steel.Materials (Basel, Switzerland) · 2021Article
- Electrospun Nanofiber Mats for Filtering Applications-Technology, Structure and Materials.Polymers · 2021Review
- 3D Printable Electrically Conductive Hydrogel Scaffolds for Biomedical Applications: A Review.Polymers · 2021Review
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
6 authors.
Funding
Abstract
Electrospinning is a frequently used method to prepare air and water filters. Electrospun nanofiber mats can have very small pores, allowing for filtering of even the smallest particles or molecules. In addition, their high surface-to-volume ratio allows for the integration of materials which may additionally treat the filtered material through photo-degradation, possess antimicrobial properties, etc., thus enhancing their applicability. However, the fine nanofiber mats are prone to mechanical damage. Possible solutions include reinforcement by embedding them in composites or gluing them onto layers that are more mechanically stable. In a previous study, we showed that it is generally possible to stabilize electrospun nanofiber mats by 3D printing rigid polymer layers onto them. Since this procedure is not technically easy and needs some experience to avoid delamination as well as damaging the nanofiber mat by the hot nozzle, here we report on the reversed technique (i.e., first 3D printing a rigid scaffold and subsequently electrospinning the nanofiber mat on top of it). We show that, although the adhesion between both materials is insufficient in the case of a common rigid printing polymer, nanofiber mats show strong adhesion to 3D printed scaffolds from thermoplastic polyurethane (TPU). This paves the way to a second approach of combining 3D printing and electrospinning in order to prepare mechanically stable filters with a nanofibrous surface.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.