ArticleMaterials (Basel, Switzerland)2019
Trueness of the Inner Surface of Monolithic Crowns Fabricated by Milling of a Fully Sintered (Y, Nb)-TZP Block in Chairside CAD-CAM System for Single-visit Dentistry.
Article in Materials (Basel, Switzerland), 2019. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 16 papers.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
16 citing papers in PubMed.
- Chitosan coating effects on biological response to niobia-modified yttria-stabilized zirconia.The journal of advanced prosthodontics · 2026Article
- Accuracy, Reproducibility, and Gaps in Different Angulations of 3D-Printed versus Milled Hybrid Ceramic Crown.European journal of dentistry · 2025Article
- Osseointegration properties of niobia-modified yttria-stabilized zirconia implant surface: anThe journal of advanced prosthodontics · 2025Article
- The effect of burs wear during milling on accuracy of zirconia lithium silicate single crowns: 3-dimensional analysis.BMC oral health · 2025Article
- The trueness of CAD-CAM custom-milled post-and-cores: a comparison of three materials and two milling systems.European oral research · 2025Article
- Accuracy analysis of all-ceramic crowns with different materials in CAD/CAM digital replication mode.BMC oral health · 2025Article
- Exploring the Properties and Indications of Chairside CAD/CAM Materials in Restorative Dentistry.Journal of functional biomaterials · 2025Review
- Evaluation of Fitness and Accuracy of Milled and Three-Dimensionally Printed Inlays.European journal of dentistry · 2023Article
- Comparison of occlusal contact errors of 6 chairside CAD/CAM crowns: a self-controlled clinical study.Clinical oral investigations · 2023Article
- Analysis of surface characteristics of (Y, Nb)-TZP after finishing and polishing.The journal of advanced prosthodontics · 2022Article
- Fit, Precision, and Trueness of 3D-Printed Zirconia Crowns Compared to Milled Counterparts.Dentistry journal · 2022Article
- Comparison of dimensional accuracy between direct-printed and thermoformed aligners.Korean journal of orthodontics · 2022Article
- Comparative analysis on intaglio surface trueness, wear volume loss of antagonist, and fracture resistance of full-contour monolithic zirconia crown for single-visit dentistry under simulated mastication.The journal of advanced prosthodontics · 2022Article
- Study of Wear Phenomenon of a Dental Milling Cutter by Statistical-Mathematical Modeling Based on the Experimental Results.Materials (Basel, Switzerland) · 2022Article
- Clinical Feasibility of Fully Sintered (Y, Nb)-TZP for CAD-CAM Single-Unit Restoration: A Pilot Study.Materials (Basel, Switzerland) · 2021Article
- Ceramic Materials and Technologies Applied to Digital Works in Implant-Supported Restorative Dentistry.Materials (Basel, Switzerland) · 2020Review
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
4 authors.
Funding
Abstract
A single-visit zirconia restoration can be easily achieved if direct milling of a fully sintered zirconia block can be performed without much effort. However, no studies have yet been reported regarding the evaluation of the trueness of crown fabricated from chairside-milling of a fully sintered zirconia block in the chairside computer-aided design and computer-aided manufacturing (CAD-CAM) system for single-visit dentistry. This in vitro study aimed to evaluate the trueness of crowns fabricated by milling a fully sintered zirconia block in the chairside CAD-CAM system and investigate the clinical implications for single-visit chairside restoration. Crowns were fabricated either by chairside-milling a fully sintered block of niobium oxide containing yttria-stabilized tetragonal zirconia polycrystals ((Y, Nb)-TZP) without the sintering process (n = 12) in a chairside single-visit dentistry system (Chairside group) or by laboratory-milling a partially sintered 3 mol% block of yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) followed by the sintering process (n = 12) in a conventional laboratory system (Labside group). Crown fabrication time, milling tool diameter and the trueness of each crown were evaluated. All trueness values of both groups were within the clinically acceptable range, although a significant difference between the Chairside (43.0 ± 3.67 μm) and Labside groups (37.4 ± 2.41 μm) was observed (P < 0.05). Mean fabrication time was 0.52 h and 1.42 h for Chairside and Labside groups, respectively. A decrease in the tool diameter was observed for the Chairside group.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.