Retained Curved Needle After Balloon Kyphoplasty: A Complication with a Novel Device and Its Management.

To date, no case studies specifically describing a curved kyphoplasty needle becoming lodged in the vertebral body with the inability to be withdrawn have been reported. We describe a case involving a single level balloon kyphoplasty with a curved coaxial needle during which the cement delivery device could not be removed after cavity filling. In this case, a board-certified interventional pain management specialist was performing balloon kyphoplasty for an L2 osteoporotic vertebral compression fracture. The tools utilized in this procedure included flexible curved instruments designed to traverse the vertebral body and achieve uniform cement distribution through a unipedicular approach. Cannulation and cavity formation were completed without issue. Upon conclusion of cement filling, the curved cement delivery device was unable to be removed. After several attempts to remove the needle and consultation with both the device company and local spine surgeons, it was agreed that the device should be cut at the level of entry into the pedicle and left as a retained foreign object. The involved area was surgically exposed, the retained instrument was cut flush to the pedicle, and the free portion was removed without further complication. The patient followed up in clinic several months later without evidence of neurologic complications. Considerations when using a curved kyphoplasty device and a method of resolution when faced with the inability to remove such an instrument are discussed.