Aptamer based ratiometric electrochemical sensing of 17β-estradiol using an electrode modified with gold nanoparticles, thionine, and multiwalled carbon nanotubes.

Gold nanoparticles (AuNPs) with a size of ~3 nm were placed on a thionine-multiwalled carbon nanotube (Thi-CNTs) conjugate to form a novel AuNP-Thi-CNTs nanocomposite. Its morphology and composition were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The nanocomposite was placed on an electrode and used as a redox-active signaling interface to fabricate a ratiometric electrochemical aptasensor for 17β-estradiol (E2). The potentiostatic insertion method was applied to insert an aptamer against E2 into a thin alkane monolayer to warrant an adequate distance between aptamers. The aptamer against E2 acts as both a collector and separator to specifically bind E2. The electrode displays two peak signals (at +0.50 V vs. SCE for E2; and at -0.32 V for Thi) which increase and decrease, respectively, in the 12 pM to 60 nM E2 concentration range. Therefore, the current ratio can be used to reliably, reproducibly, and sensitively quantify the concentration of E2. Graphical abstract Schematic presentation of a novel AuNP-Thi-CNTs nanocomposite. AuNP-Thi-CNTs showed good electrocatalytic oxidation to E2. AuNP-Thi-CNTs was used as self-redox signal interface to fabricate aptasensor. Dual signals of extrinsic E2 and inner Thi was applied to monitor the concentration of E2.