Assessment of soil buffer capacity on nutrients and pharmaceuticals in nature-based solution applications.

The ability of a soil to sustain infiltration rates and to attenuate pollutants is critical for the design and operation of Managed Aquifer Recharge/Soil Aquifer Treatment and phyto-treatment schemes, also referred to as "Blue Infrastructures". We investigated the buffering capacity of a sediment sample and a peat soil sample for nutrients and selected pharmaceutical compounds and its evolution under continuous infiltration of secondary treated wastewater (TWW) in column experiments. Samples were obtained from two blue infrastructures, the Sant'Alessio Induced River Bank Filtration plant and the San Niccolò large-scale phyto-treatment plant in Italy, and were mainly different in their organic carbon contents (0.9 and 48%, respectively). In the column experiments, a constant infiltration rate of about 0.5 L/d was maintained for 6 months. After 4 months of operation, diclofenac and carbamazepine were spiked into the TWW to evaluate their fate. Water quality was monitored by periodic water sampling from the column inflow, at sampling ports along the column length, and at the outflow. Hydraulic conductivity (K) was also monitored. The hydraulic conductivity of the Sant'Alessio sediment decreased by a factor of 10 during the first 10 days of infiltration and then stabilized, while for the San Niccolò K (initially lower) remained constant for 50 days until it decreased following a change of the redox condition in the column. The different redox conditions, due to the two different soils tested, influenced also the concentration and mobility of PO